Abstract

Abstract. The Thermal And Near infrared Sensor for carbon Observation – Fourier Transform Spectrometer (TANSO-FTS) on the Japanese Greenhouse gases Observing SATellite (GOSAT) has been returning data since April 2009. The version 9 (v9) Atmospheric Carbon Observations from Space (ACOS) Level 2 Full Physics (L2FP) retrieval algorithm (Kiel et al., 2019) was used to derive estimates of carbon dioxide (CO2) dry air mole fraction (XCO2) from the TANSO-FTS measurements collected over its first 11 years of operation. The bias correction and quality filtering of the L2FP XCO2 product were evaluated using estimates derived from the Total Carbon Column Observing Network (TCCON) as well as values simulated from a suite of global atmospheric inversion systems (models) which do not assimilate satellite-derived CO2. In addition, the v9 ACOS GOSAT XCO2 results were compared with collocated XCO2 estimates derived from NASA's Orbiting Carbon Observatory-2 (OCO-2), using the version 10 (v10) ACOS L2FP algorithm. These tests indicate that the v9 ACOS GOSAT XCO2 product has improved throughput, scatter, and bias, when compared to the earlier v7.3 ACOS GOSAT product, which extended through mid 2016. Of the 37 million soundings collected by GOSAT through June 2020, approximately 20 % were selected for processing by the v9 L2FP algorithm after screening for clouds and other artifacts. After post-processing, 5.4 % of the soundings (2×106 out of 37×106) were assigned a “good” XCO2 quality flag, as compared to 3.9 % in v7.3 (<1 ×106 out of 24×106). After quality filtering and bias correction, the differences in XCO2 between ACOS GOSAT v9 and both TCCON and models have a scatter (1σ) of approximately 1 ppm for ocean-glint observations and 1 to 1.5 ppm for land observations. Global mean biases against TCCON and models are less than approximately 0.2 ppm. Seasonal mean biases relative to the v10 OCO-2 XCO2 product are of the order of 0.1 ppm for observations over land. However, for ocean-glint observations, seasonal mean biases relative to OCO-2 range from 0.2 to 0.6 ppm, with substantial variation in time and latitude. The ACOS GOSAT v9 XCO2 data are available on the NASA Goddard Earth Science Data and Information Services Center (GES-DISC) in both the per-orbit full format (https://doi.org/10.5067/OSGTIL9OV0PN, OCO-2 Science Team et al., 2019b) and in the per-day lite format (https://doi.org/10.5067/VWSABTO7ZII4, OCO-2 Science Team et al., 2019a). In addition, a new set of monthly super-lite files, containing only the most essential variables for each satellite observation, has been generated to provide entry level users with a light-weight satellite product for initial exploration (CaltechDATA, https://doi.org/10.22002/D1.2178, Eldering, 2021). The v9 ACOS Data User's Guide (DUG) describes best-use practices for the GOSAT data (O'Dell et al., 2020). The GOSAT v9 data set should be especially useful for studies of carbon cycle phenomena that span a full decade or more and may serve as a useful complement to the shorter OCO-2 v10 data set, which begins in September 2014.

Highlights

  • A new era of dedicated satellite observations of greenhouse gases began in 2009, with the successful launch of gases Observing SATellite (GOSAT) (Kuze et al, 2009)

  • Several important components of the v9 Atmospheric Carbon Observations from Space (ACOS) Level 2 Full Physics (L2FP) retrieval configured for GOSAT have not changed from v7.3: (i) the surface pressure prior constraint remains set at ±2 hPa, (ii) three empirical orthogonal functions (EOFs) are fit in each spectral band, and (iii) a zero level offset (ZLO) is fit in the state vector to account for non-linearity in the ABO2 signal chain on GOSAT TANSO-FTS (Crisp et al, 2012)

  • The explicit formula for application of the ACOS GOSAT v9 correction is provided in Sect. 2.5.6 of the Data Users Guide (DUG) (O’Dell et al, 2020)

Read more

Summary

Introduction

A new era of dedicated satellite observations of greenhouse gases began in 2009, with the successful launch of GOSAT (Kuze et al, 2009). Stitutes have developed their own products (e.g., Butz et al, 2011; Crisp et al, 2012; Cogan et al, 2012; Heymann et al, 2015) One of these groups, the Atmospheric CO2 Observations from Space (ACOS) team, used a Level 2 Full Physics (L2FP) retrieval algorithm developed for the NASA Orbiting Carbon Observatory (OCO) to derive estimates of XCO2 from the GOSAT data (O’Dell et al, 2012; Crisp et al, 2012). Houweling et al (2015) conducted an extensive inter-comparison of the early GOSAT-based atmospheric inversion system studies and reported a reduction in the global land sink for CO2 and a shift in the terrestrial net uptake of carbon from the tropics to the extratropics These studies highlighted the role of spatiotemporal systematic errors in the satellite retrievals and the negative impact they can have on estimation of CO2 sources and sinks using atmospheric inversion systems.

The GOSAT instrument and measurements
GOSAT TANSO-FTS instrument
ACOS GOSAT v9 L1b measurements
The ACOS v9 L2FP XCO2 retrieval algorithm
ACOS L2FP algorithm updates
ACOS GOSAT v9 L2FP sounding selection and convergence
ACOS GOSAT v9 XCO2 quality filtering and bias correction
CO2 prior source 7 Land surface model
Evaluation
Evaluation of ACOS GOSAT v9 XCO2
ACOS GOSAT v9 “good-quality” data volume
ACOS GOSAT v9 XCO2 spatiotemporal analysis
ACOS GOSAT v9 XCO2 versus TCCON
ACOS GOSAT v9 XCO2 versus models
ACOS GOSAT v9 XCO2 versus OCO-2
Summary

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.