Abstract

PurposeThe purpose of this paper is to design a low phase noise and high figure of merit, fully integrated, voltage‐controlled oscillator (VCO) which was fabricated in TSMC CMOS 0.18‐μm 1P6M process.Design/methodology/approachA differential PMOS cross‐coupled architecture VCO with the capacitive feedback technology was designed to increase the linearity of frequency tuning range and decrease the phase noise. Varactor determining the performance of tuning range is also a key component in the design of VCO. The authors adopt the accumulation‐mode MOS varactor. The output spectrum and the phase noise are measured by E5052A spectrum analyzer.FindingsThe VCO is successfully fabricated in TSMC RF CMOS 0.18um 1P6M process. The measured tuning range is from 10.875 GHz ∼ 11.1 GHz with control voltage from 0 to 1.5 V. The measured phase noise is as low as −120.42 dBc/Hz at 1 MHz offset and the high FOM is −189.5 dBc/Hz. The output spectrum is −10.51dBm with center oscillator frequency of 10.942 GHz. The core circuit without buffer consumes power of 15 mW from a 1.8 V supply voltage.Originality/valueThis paper shows a fully integrated CMOS LCVCO architecture using capacitive feedback technology with low phase noise and high figure of merit for OC‐192 SONET applications.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.