Abstract
Modulation threshold, that is, the modulation depth required to discriminate a sample of amplitude-modulated (AM) noise from a sample of unmodulated noise, was measured as a function of modulation rate (16--320 Hz), modulator waveform (sine or square), and the bandwidth of the AM noise (0.5--8.0 kHz). Modulation threshold increases monotonically with modulation rate, sine-wave thresholds are greater than square-wave thresholds, and threshold rises as the bandwith of the AM stimulus decreases. These effects all support the use of some form of energy detection model to explain modulation threshold. The modulation thresholds were compared with pitch thresholds gathered under precisely the same conditions. Pitch threshold or, alternatively, rate threshold was taken to be the modulation depth required to decide which of two samples had the higher modulation; the rate difference was 20%--just over three semitones. In the region above about 70 Hz, rate threshold is essentially a constant multiple of modulation threshold, indicating that the primary constraint on rate threshold is the audibility of the modulation. Below 70 Hz, rate and modulation threshold diverge; it is argued that the limit on rate threshold in this region is probably the length of the correlation required to extract the periodicity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
