Abstract
A method of sequential injection determination of tricyclic antidepressants (amitriptyline, desipramine, imipramine) using amperometric immunosensors based on screen-printed graphite electrodes modified by carbon nanomaterials (carbon nanotubes, graphene oxide or fullerene) in combination with hexarhenium chalcogenide clusters is proposed. Sequential injection analysis was performed at a sweep rate of 10 mV/s; the flow rate (supporting electrolyte – phosphate buffer solution with pH 7.0) was also varied from 20 to 40 µl/s. Composition of the modifier affects the analytical capability of immunosensors. Screening of various types of modifiers showed that the immunosensor based on graphene oxide and cyanide complexes of rhenium chalcogenide clusters exhibited the highest sensitivity of 23.9±0.9 with a range of working concentrations of 1·10–10–1·10–5 M, and even wider range of detectable concentrations, 1·10–10–1·10–4 M was observed for the immunosensor based on fullerene and cyanide complexes of rhenium chalcogenide clusters. The lowest limit of the determined contents was (4–7)·10–11 M. Relative standard deviation of repeatability (Sr) did not exceed 0.046. The results obtained show that the proposed immunosensors can be used in sequential injection determination of trace amounts of medicinal compounds (antidepressants) in biomedical objects.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
