Abstract
Objective: Herein, we report the effect of variation of hydrogen flow rate on the properties of Si:H films synthesized using PE-CVD method. Raman spectroscopy analysis show an increase in crystalline volume fraction and crystallite size implying that hydrogen flow in PE-CVD promotes the growth of crystallinity in nc-Si:H films with an expense of a reduction in deposition rate. Methods: FTIR spectroscopy analysis indicates that hydrogen content in the film increases with an increase in hydrogen flow rate and hydrogen is predominantly incorporated in Si-H2 and (Si-H2)n bonding configuration. The optical band gap determined using E04 method and Tauc method (ETauc) show an increasing trend with an increase in hydrogen flow rate and E04 is found higher than ETauc over the entire range of hydrogen flow rate studied. Results and Conclusion: We found that the defect density and Urbach energy increases with an increase in hydrogen flow rate. Photosensitivity (σPhoto /σDark) decreases from ~103 to ~1 when hydrogen flow rate is increased from 30 sccm to 100 sccm and can be attributed to amorphous-to-nanocrystallization transition in Si:H films. The results obtained from the present study demonstrated that hydrogen flow rate is an important deposition parameter in PECVD to synthesize nc-Si:H films.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Recent Innovations in Chemical Engineering (Formerly Recent Patents on Chemical Engineering)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
