Abstract

Thin films of lithium nickel vanadates are deposited by pulsed-laser deposition from targets with different lithium contents. The as-deposited films are mainly amorphous and possess smooth and dense surfaces as revealed by X-ray diffraction and scanning-electron microscopy. The initial loss in capacity between the first discharge and charge decreases with increase in the lithium content in the films. The film grown from the target of Li 1.2NiVO 4 gives the best performance with a retainable capacity as high as 410 μAh per cm 2 μm. There is almost no loss in capacity from the 11th up to the 50th cycle even though a fast decay occurs during the first several cycles. Cyclic voltammograms reveal cathodic peaks at 1.78 and 0.56 V and anodic peaks at 1.27 and 2.47 V, in line with the shapes of the discharge and charge curves.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.