Amorphous Cellulose Electrolyte for Long Life and Mechanically Robust Aqueous Structural Batteries

Abstract

AbstractAqueous zinc (Zn)‐based structural batteries capable of both electrochemical energy storage and mechanical load‐bearing capabilities are attractive for next‐generation energy storage for future electric vehicles due to their eco‐friendliness, non‐toxic, and safe nature. However, parasitic free water activities plague aqueous Zn‐based batteries, detrimental to the electrochemical performance and longevity of the cell. Developing polymer gel electrolytes is a notable potential solution, but they usually have poor electrode interfacial interactions and inadequate mechanical properties. This article introduces a novel non‐fibrous highly amorphous cellulose polymer electrolyte “Cellyte” for aqueous structural Zn‐based batteries. Cellyte exhibits a high strength of ≈24 MPa and Young's modulus of ≈380 MPa, along with the ability to suppress parasitic water activity. The symmetric Zn||Cellyte||Zn cell therefore demonstrates excellent cycling stability of over ≈3000 h. Cellyte can also serve as the binder for the structural cathode material, creating a continuous polymer electrolyte–cathode interface, thereby increasing mechanical robustness and decreasing interfacial resistances of the battery, allowing the structural Zn||Cellyte||LMO‐CF battery to achieve high electrochemical performance with excellent cycling stability over 1200 h with ≈91.5% capacity retention. This provides a pathway to design mechanically robust, electrochemically performing, and safe structural batteries.