Abstract
In part 1 of this paper, it was demonstrated that a nitroglycerine and polyethylene glycol based propellant containing ammonium perchlorate degraded at a slower rate at temperatures of 80 °C or less compared with the other two energetic materials studied which did not have this oxidizer present. It was suggested that ammonium perchlorate might act as an oxygen inhibitor reducing the oxidation rate of the polyethylene glycol binder which decreases the rate of propellant decomposition. In part 2, the specific interaction between ammonium perchlorate, nitroglycerine and polyethylene glycol is reported. It has been shown that at temperatures lower than 90 °C, if there is any uncured and unstabilised PEG present, nitroglycerine rapidly degrades in the presence of ammonium perchlorate but this is prevented if stabiliser is added. In addition, ammonium perchlorate initially appears to hinder acid hydrolysis of nitroglycerine which also slows down the degradation of polyethylene glycol based propellants. However, in the long term at low temperatures, or short term at higher temperatures, AP accelerates the decomposition of NG.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.