Abstract
A study of the effect of plasma treatments on the mechanical properties and adhesion of ultra-high strength polyethylene fibres to epoxy resin is reported. Fibres were treated with ammonia plasma under various time and power conditions. The fibre/matrix interfacial shear strength was measured using load and fibre pull-out data obtained in a single-fibre pull-out test. The debonding was optically as well as acoustically monitored. Optical birefringence patterns were visible at the fibre debond region. Acoustic emission signals generated from debonding and stick-slip processes were also detected. A more than four-fold increase in the interfacial shear strength was achieved by plasma treating the fibres at the discharging condition of 30 W and 0.5 torr for 1 min. The birefringence patterns showed, qualitatively, that the shear in the matrix around the fibres increased for treated fibres and extended further into the matrix material. Surface topography of the pulled out fibres showed that the failure mode was unchanged by the treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
