Amine-Modified Carbon Xerogels as Effective Carbon-Based Adsorbents of Anionic Dye from Aqueous Solutions.

Abstract

Carbon xerogels were obtained by polycondensation of resorcinol and formaldehyde in a water medium. Their surface was oxidized by ammonium persulfate and then modified with amine groups. Four amines were used: methylamine, ethylamine, propylamine, and ethylenediamine, differing in carbon chain length and number of amine groups. The materials were characterized by low-temperature nitrogen sorption, elemental analysis, thermal analysis, X-ray diffraction, infrared spectroscopy, and determination of the surface oxygen group content with the use of the Boehm method. The final carbon adsorbents had surface areas ranging from 172–663 m2/g and acid–base nature. They were applied for adsorption of thymol blue from water solution. The sorption capacities of the studied adsorbents ranged from 83 to 140 mg/g. The presence of amine groups on the xerogel surface was found to increase its sorption capacity towards the dye studied. The dye adsorption process is endothermic and spontaneous, as indicated by the positive values of ΔH and the negative values of ΔG, respectively. The kinetics of adsorption of thymol blue was established to be described by the pseudo-second-order model. The equilibrium data were analyzed by the Langmuir and Freundlich models. The character of thymol blue adsorption is much better described by the Langmuir isotherm.