Aminated silver nanowires as current collectors and binders for the preparation of multilayer graphite loading high-performance silk fiber electrodes

Abstract

The rapid development of wearable electronic devices has put forward high requirements for their energy storage devices. Currently, fiber supercapacitors have attracted widespread attention owing to their miniature sizes and high flexibility, but an improvement in their electrochemical performance is often limited by the loading of conductive energy storage materials. Herein, a multilayer graphene loading strategy based on amino silver nanowires (NH2-AgNWs) was developed to prepare silk electrodes, wherein NH2-AgNWs were used as current collectors and binders to increase the conductivity of silk electrodes and achieve multilayer loading graphene on silk. The prepared silk electrode exhibited a high specific capacitance of 37.14 mF/cm because of the multilayer loading of the conductive energy storage material. The generality of this method is further demonstrated with a cotton thread substrate electrode, which exhibited a specific capacitance of 69.45 mF/cm. Additionally, a parallel fiber-shaped supercapacitor (PFSS) was assembled, at the maximum power density of 74.48 mW/m2, the energy density reaches 1468.87 mWh/m2. The PFSS exhibited a capacitance retention rate of 93.01 % when the bending degree was 90°. This study proposes a multilayer graphene loading strategy based on NH2-AgNWs for the preparation of fiber electrodes and a flexible fiber supercapacitor was assembled.