Abstract
A tantalum/niobium concentrate has been mechanically milled with magnesium and either graphite or nitrogen for 100 h. Directly after milling the formation of MgO was evident in both systems, a mixed metal carbide (Ta,Nb)C was also present in the carbon system. A cubic phase, close to that expected for the mixed metal nitride, was found in the powder milled under nitrogen. Annealing of the powders showed the reaction was incomplete with reduced oxide phases present. The carbide/nitride phases were readily separated from the MgO by acid leaching which left powders <5 μm in size. The leaching preferentially dissolved the smaller, more highly strained crystallites in both cases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.