Abstract
The eutectic Al–6Ni (wt.%) alloy exhibits excellent strength at ambient and elevated temperature, provided by a high volume fraction of Al3Ni microfibers formed during solidification. Here, Al–6Ni is micro-alloyed with Sc and Zr (with 0.1Sc+0.2Zr, 0.2Sc+0.4Zr and 0.3Sc+0.2Zr, wt.%), creating two additional populations of primary and secondary Al3(Sc,Zr) precipitates. The fully eutectic microstructure (α-Al + Al3Ni) observed in Al–6Ni alloy changes, with Sc and Zr addition to hypoeutectic microstructure with primary α-Al grains nucleated on solidification by primary Al3(Sc,Zr) precipitates. Upon subsequent aging, fully-coherent Al3(Sc,Zr) nanoprecipitates form in the α-Al matrix between Al3Ni microfibers, providing substantial precipitation strengthening, which is maintained for up to 1 month at 350 °C. Alloy strength - both at ambient temperature and during creep at 300 °C - can be quantitatively described through a superposition of precipitation strengthening by Al3(Sc,Zr) nanoprecipitates and load-transfer strengthening by Al3Ni microfibers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
