Abstract

This article describes a simple but effective method to dealuminate and realuminate H-Beta zeolite as a catalyst for removing organic acids from bio-oils via their esterification reactions with alcohols. A series of modified Beta zeolites were prepared by mechanically mixing an oxalic acid leached Beta zeolite with different amounts of solid-phase aluminum fluoride (AlF3) and calcinating the resulting mixtures. The structure, texture property, and acidity of the oxalic acid leached Beta zeolite can be finely adjusted by simply changing the amount of AlF3 used. Dealumination and realumination could simultaneously take place via the interaction of Beta zeolite with AlF3 when the content of AlF3 was between 1.5 and 3.0 wt %. Only dealumination happened when the content of AlF3 was lower than 1.0 wt % or higher than 4.0 wt %. The catalytic activities for esterification reaction of sec-butanol and acetic acid showed that the modified Beta zeolite with a suitable amount of AlF3 exhibited much higher selectivity than the oxalic acid leached H-Beta zeolite.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.