Abstract
AbstractA new metals‐polymeric composite, Metx‐EPS (I), was prepared to be used as catalyst in water or in two‐phase aqueous conditions. The metals source was an exhausted catalytic converter that was grinded and treated with an acidic solution at room temperature. After filtration, the solution was concentrated, neutralized and added to a broth of Klebsiella oxytoca DSM 29614 to produce (I) where metals are embedded in a peculiar polysaccharide structure (EPS). The composite was easily recovered from the fermentation broth and purified. The process protocol was verified many times and was shown to be reproducible satisfactorily. The % recovery of metals, originally present in the converter, was good as determined by atomic absorption. The morphology and the chemical state of main metals in (I) were investigated by X‐ray absorption spectroscopy methods (XANES and EXAFS). No metallic alloy seems to be evident. The catalytic activity and a possible synergic effect due to the presence of the different metals was valuated in the hydrogenation of some substrates, valuable precursors for the production of fine chemicals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have