Abstract
An account is given of the equipment used and the methods which have been developed at the National Physical Laboratory for calibrating alternating-current indicating instruments to an accuracy of 0.1%, or better, of full-scale deflection. The power required for carrying out these tests may range from a few watts for a low-range voltmeter or ammeter up to 60 kW for the equipment used in a turbo-alternator test at high voltage. When the power required is large and at a frequency below 600 c/s, rotating machinery is used, giving an output stable to 0.02% and of waveform with harmonic content not exceeding 2%. For smaller powers, oscillator-amplifier sets are used at all frequencies from 50 c/s up to lOOkc/s, giving an output stable to 0.01% and of waveform with harmonic content not exceeding 0.3%. Instruments are tested by comparison with a standard voltmeter or wattmeter which must itself be calibrated to a higher order of accuracy, say 0.01 or 0.02%. The auxiliary resistors used with these instruments for range changing must also maintain constant and known values under all loading conditions to about 0.01%. Finally, the instrument, a voltmeter, used as a d.c./a.c. transfer instrument must be calibrated on direct current against a Weston cell in association with a suitable voltage divider. The e.m.f. of the Weston cell is maintained constant to approximately 0.001% by maintaining the cell at a temperature constant to 1/4° C, while the error of the voltage divider is of the same order, so that no significant error is introduced into the calibration on account of the d.c. standard.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the IEE - Part II: Power Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.