Abstract
One cycle alternating current (AC) plasma operation without a dwell time has been achieved in the STOR-M tokamak with good reproducibility using a newly developed ohmic heating circuit. The plasma current of +24 kA is smoothly ramped down in 10 ms with a rampdown rate of around 2.0 kA/ms and then ramped up to between -20 and -24 kA directly without a dwell time. The plasma density of up to (3.7+or-0.6)*1018 m-3 remains at the current reversal as observed in recent soft landing experiments. The key to a successful, reproducible and direct transition in AC tokamak operations on STOR-M is to control both the total vertical field by a feedback control system and the plasma density by careful gas puffing during the current reversal phase. This experiment has demonstrated that the initial loop voltage for the second negative current is minimized when the dwell time approaches zero, and the AC operation without dwelling is possible whenever the plasma current can be softly terminated with a finite residual plasma density
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.