Abstract
The study aimed to evaluate the drying curves and the effects of drying temperature on the volumetric shrinkage of the grain mass and geometric diameter of the soy bean M7211RR. Were used soy bean the cultivar M7211RR harvested in Santa Helena de Goias-GO, with an initial moisture content of approximately 0.30 d.b. (decimal dry basis) and dried to 0.13 (d.b.). The experiment was conducted at Laboratorio de Pos-Colheita de Produtos Vegetais of the Instituto Federal Goiano – Câmpus Rio Verde. During the drying process, the orthogonal axes (length, width and thickness) of soy beans were measured to determine the geometric diameter. To obtain the volumetric shrinkage, the soy bean was dried on trays and then placed in graduated cylinder and thus reducing the volume of product was monitored throughout the drying. Increasing the temperature of 50 °C to 90 °C decreases the drying time of 7.66 hours to 1.98 hours, streamlining the process for 3.87 times. The rate of shrinkage and the diameter geometric of soybean decreases during drying, and this effect is intensified with increasing temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.