Abstract
This is a study on alloying method in adding zirconium to magnesium and its alloys, by use of ZrCl4, ZrCl4+KCl, ZrCl4+KCl+NaCl, Mg-Zr master alloy and ZrCl4+alkali metal haloids. Regarding alloying efficiency, no difference was found between thesealloying agents. But, it was found that Mg-Zr master alloy and ZrCl4+KCl+NaCl were better than others in practice, due to the fact that they made less chloride contamination in magnesium alloy castings.Zirconium alloying agents should be added while the molten alloy remained at low temperature, in order to minimize iron, which inhibits the alloying zirconium, soluting into magnesium from steel crucible.The content of zirconium and rare earth metals get decreased as the magnesium alloy containing them is repeatedly remelted, it is therefore, necessary to vivify the zirconium content. In this operation, the use of ZrCl4 decreases the content of rare earth metals in the alloy, while Mg-Zr master alloy, ZrCl4+(RE) Cl3, ZrCl4+NaF, or ZrCl4+MgO can minimize the loss of rare earth metals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.