All-solid-state potentiometric sensor using single-walled carbon nanohorns as transducer

Abstract

Single-walled carbon nanohorns (SWCNHs) was utilized as an ion-to-electron transducer to fabricate all-solid-state ion-selective electrodes (ISE) for the first time. To evaluate the performance of developed SWCNHs-based calcium ISE, various electrochemical experiments were carried out. A Nernstian response (29.69 ± 0.24 mV/decade, R2 = 0.9996) was acquired across a broad linear range between 10−6 and 10−2 M, and the detection limit of 10−6.1 M was achieved in the meantime. Additionally, water layer test and reversed chronopotentiometry were used to estimate the long-term and short-term stability of SWCNHs-based ISE, respectively, indicating SWCNHs is capable of enhancing potential stability on account of its hydrophobicity. Furthermore, a SWCNHs-based reference electrode (RE) was fabricated by directly coating a photo-polymerised reference membrane (RM) onto a SWCNHs modified electrode. Results demonstrated that the SWCNHs-based RE exhibited slight potential fluctuation for common ions with different charges over a wide concentration range of calibration. Based on these superior results, an integrated all-solid-state SWCNHs-based potentiometric sensing device combined SWCNHs-based ISE and SWCNHs-based RE was constructed for detecting calcium, which shows a Nernstian response with a slope of 27.14 mV/decade. This developed electrode in the aid of SWCNHs exhibits fast response as well as outstanding potential stability, making it extreme promising for routine sensing application.