Alkalinity production as an indicator of failure in steel slag leach beds treating acid mine drainage

Abstract

Acid mine drainage is a serious environmental problem throughout mining regions of the US and around the world. In Appalachia, reuse of steel slag from steel production as a source of alkalinity for treatment of acid mine drainage has become a common practice. In these systems, dubbed steel slag leach beds, relatively clean surface water is percolated through a bed of steel slag to add large amounts of alkalinity to the water before mixing it with acidic, metalliferous mine water. These beds do not operate consistently and their failure mechanisms are poorly understood. Using the experience of Raccoon Creek watershed in southern Ohio, the alkalinity distribution of the discharge of six steel slag leach beds is compared. Two of these beds are still functional, one has been abandoned and three are operating poorly. The difference in alkalinity distribution between these beds suggests that a carbonate-dominated alkalinity system is an indicator of a poorly performing steel slag leach bed, while a more even distribution between hydroxide, carbonate and bicarbonate may point to more ideal operating conditions. In eight laboratory column experiments, this evidence was then expanded upon by testing different mixed media substrates (differing mixes of steel slag, wood chips and river gravel) to see which provided the most ideal alkalinity distributions. The columns that had steel slag mixed either with wood chips or wood chips and river gravel outperformed the column with slag only in terms of alkalinity distribution, perhaps due to microbial processes or increased hydraulic conductivity without significant added calcium or carbon that could drive calcium carbonate precipitation within the beds and causing them to fail.