Abstract
Sugarcane hybrids have been developed through genetic engineering and plant breeding to produce lignocellulosic crops that are more susceptible for second generation biofuels production. Adequate evaluation of these plants requires process development combined with proper economic assessment. In this study, alkaline sulfite pretreatment of sugarcane biomass derived from four selected sugarcane hybrids was assessed for second generation ethanol production integrated with a first generation biorefinery. Process simulation and economic analysis were used to evaluate 32 biorefinery scenarios including different pretreatment conditions (high and low severity), enzymatic hydrolysis time (24 and 72 h) and pentoses destination (fermentation to ethanol or discard). Results indicated that high field productivity and low recalcitrance after pretreatment were critical characteristics for a selected sugarcane hybrid. High sodium sulfite loads were useful to increase ethanol production in the 1G2G biorefinery. However, sodium sulfite cost was relevant in the 1G2G ethanol cost. Sensitivity analysis applied to the best biorefinery scenarios indicated that maximum sodium sulfite prices to reach minimum acceptable rate of return (12%) were US$ 0.66/kg and US$ 0.47/kg for severe and mild pretreatments, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.