Alkaline modification of ZSM-5 catalysts for methanol aromatization: The effect of the alkaline concentration

Abstract

The effects of alkaline treatment on the physical properties of ZSM-5 catalysts and on their activities for methanol to aromatics conversion have been investigated. A mild alkaline treatment (0.2 and 0.3 mol/L NaOH) created mesopores in the parent zeolite with no obvious effect on acidity. The presence of mesopores gives the catalyst a longer lifetime and higher selectivity for aromatics. Treatment with 0.4 mol/L NaOH decreased the number of Bronsted acid sites due to dealumination and desilication, which resulted in a lower deactivation rate. In addition, more mesopores were produced than with the mild alkaline treatment. As a result, the lifetime of the sample treated with 0.4 mol/L NaOH was almost five times that of the parent ZSM-5. Treatment with a higher alkaline concentration (0.5 mol/L) greatly reduced the number of Bronsted acid sites and the number of micropores resulting in incomplete methanol conversion. When the alkaline-treated catalysts were washed with acid, some of the porosity was restored and a slight increase in selectivity for aromatics was obtained.