Abstract
Control of the alkali doping level in Cu(In,Ga)Se2 (CIGS) films was demonstrated using alkali-silicate thin layers of various thickness deposited on substrates prior to the sputtering of the Mo back contact layer. Not only the alkali density in the CIGS film, but also the Ga composition distribution in CIGS films, CIGS grain size, and consequent photovoltaic performance showed variations with the silicate layer thickness. Using alkali-silicate thin layers as an alkali source material, 17.4% and 17.7% efficiency flexible CIGS solar cells have been demonstrated on Ti and zirconia substrates, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.