Algorithm for Controlling Spillback from Ramp Meters

Abstract

The queue control algorithms that are commonly used by rampmetering controllers often permit the queue to extend a considerable distance upstream of the queue detector on the ramp. This detector senses the presence of a queue with the intent of preventing queue spillback onto the surface street or intersection that is located upstream of the ramp. Queue control is usually obtained by switching between the desired metering rate and a higher metering rate. In some cases metering is terminated. This type of limit cycle control often results in considerable variation in the length of the queue, even for a constant average vehicle arrival rate at the ramp. This high-amplitude limit cycle operation is indicated, by simulation, to result from the relatively long detector sampling and computation period (typically 1 min) that is commonly used. A control algorithm using a 10-sec sampling period is indicated to substantially reduce the limit cycle amplitude. Performance is further improved when the control algorith...