Abstract
In this study, the determinability of the remanufacturing parameters of Al7039 alloy, nowadays known as armor material, are emphasized. Commercially obtained Al7039 alloy plates are melted in a casting furnace and cast into a specially prepared mold. After the mold pressure cap is closed, the samples are squeezed into the mold with a pressure of about 18 MPa. Plates were examined by cooling at different cooling rates in order to determine the proper casting process. After the homogenization heat treatment parameters which are generally applied after casting were determined, hot forging process was started. After waiting at 400 o C temperature for 15 minutes, the plates decreased from 15 mm thickness to 6 mm thickness and cooled in the air after the process. In the heat treatment process, which is another of the production processes, the samples were made available by specifying the parameters of heat treatment, solution, quenching and artificial aging. The microstructure images taken at each stage of production and the applied mechanical tests were examined and evaluated.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
