Abstract
The present study focuses on the possibility of use of alkali activated binders for use in concrete pavements. Alkali Activated Slag Concrete (AASC) and Alkali Activated Slag Fly ash Concrete (AASFC) are prepared and the properties are compared with Ordinary Portland Cement Concrete (OPCC). The Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash (FA) are blended in the ratios 100:0, 75:25, 50:50 and 25:75 as binder and activated using strong alkaline solution. Trial mixes are carried out to identify the optimal Activator Modulus (Ms) for each combination of GGBFS and FA. The mix design for the optimal activator modulus is optimised to achieve sufficient strength for Pavement Quality Concrete (PQC) and the fresh and mechanical properties are studied in detail. The results indicate the properties of AASC and AASFC are similar or slightly better than conventional OPCC and satisfy the minimum strength requirements for concrete pavements. The application of alkali activated binders will minimise the environmental hazards occurring from augmented OPC production, along with effective utilisation of industrial waste materials and conservation of natural resources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International journal of pavement research and technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
