Airborne asbestos exposures associated with gasket and packing replacement: A simulation study of flange and valve repair work and an assessment of exposure variables

Abstract

A simulation study was conducted to evaluate worker and area exposure to airborne asbestos associated with the replacement of asbestos-containing gaskets and packing materials from flanges and valves and assess the influence of several variables previously not investigated. Additionally, potential of take home exposures from clothing worn during the study was characterized. Our data showed that product type, ventilation type, gasket location, flange or bonnet size, number of flanges involved, surface characteristics, gasket surface adherence, and even activity type did not have a significant effect on worker exposures. Average worker asbestos exposures during flange gasket work (PCME=0.166f/cc, 12–59min) were similar to average worker asbestos exposures during valve overhaul work (PCME=0.165f/cc, 7–76min). Average 8-h TWA asbestos exposures were estimated to range from 0.010 to 0.062f/cc. Handling clothes worn during gasket and packing replacement activities demonstrated exposures that were 0.71% (0.0009f/cc 40-h TWA) of the airborne asbestos concentration experienced during the 5days of the study. Despite the many variables considered in this study, exposures during gasket and packing replacement occur within a relatively narrow range, are below current and historical occupational exposure limits for asbestos, and are consistent with previously published data.