Abstract
For the community, generators are an alternative if there is a power outage or if there is a large enough electricity demand. According to workers in the field of generator rental in Trenggalek, namely "db Genset" which has the address Ds. Gondang, Kec. Tugu, Kab. Trenggalek, there are 2 types of generators, namely open generators and silent generators, and most people choose silent generators because silent generators are specially designed to muffle engine noise so they don't cause noise, very suitable for use in active environments, but silent generators often experience temperature problems rise (Overheating) which is due to a closed engine and less smooth air circulation. Thus the cooling system on the generator set is needed to support the safety of the temperature on the silent generator so that it remains normal below 70°C which is important to minimize overheating problems in the silent generator, so that it can improve the performance of the generator to work for a long time without any problems. overheating. The design of the Temperature Control System in this Silent Genset Box uses Arduino Uno as a system controller and uses the Ds18b20 sensor, the engine temperature cooling process previously relied on radiator water and radiator fans, so the idea arose to add blower fans on both sides of the silent generator box, marked with a green temperature light indicator. being below 70°C indicates the temperature inside the box is normal, the blue light indicator indicates the temperature inside the box is in the 70°C to 95°C temperature range, fan 1 is on, the red light indicator indicates the temperature in the box is in the 95°C to 120°C temperature range, fans 1 and 2 are on, and the red light indicator indicates the temperature in the box is in the temperature range of 95°C to 120°C if the temperature reaches 120°C the generator engine will turn off indicating the temperature in the box maxsimal fan 1 and 2 remain on until the temperature decreases to 40°C, and every change in temperature will send a notification via SMS to the generator operator
Highlights
Abstrak, Bagi masyarakat genset menjadi alternatif apa bila ada pemadaman listrik maupun memenuhi kebutuhan daya listrik yang cukup besar
generators are an alternative if there is a power outage
which is due to a closed engine
Summary
Abstrak-, Bagi masyarakat genset menjadi alternatif apa bila ada pemadaman listrik maupun memenuhi kebutuhan daya listrik yang cukup besar. Perancangan Sistem Pengontrol Suhu Pada Box Genset Silent ini menggunakan arduino uno sebagai pengendali sistem dan menggunakan sensor Ds18b20, proses pendingin suhu mesin sebelumnya mengandalkan air radiator dan kipas radiator maka timbul ide menambahkan kipas blower di kedua sisi box genset silent, dengan ditandai indikator lampu dan setiap perubahan suhu akan mengirimkan notifikasi melalui SMS kepada operator genset. Pada Box Genset Silent terdiri dari Input, Kontrol, dan bila ada pemadaman listrik maupun memenuhi kebutuhan daya listrik yang cukup besar.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.