Air-Gap Heat Transfer in Rotating Electrical Machines: A Parametric Study

Abstract

More than half of all electrical energy is consumed by motors and generators in an industrialized country. About 5-25% of this energy is lost and converted to heat. This heat produced by the losses has adverse effect on the lifetime and performance of a machine. A machine has to be operated at a given temperature to achieve maximum efficiency, therefore heat transfer study of machines is of special interest to rotating machines manufacturers. In this paper we investigate the heat transfer in the air-gap between the rotor and the stator of a simplified induction motor using Computational Fluid Dynamics. We consider three different air-gap widths and rotation speeds to explore the change in air-gap heat transfer when changing the air-gap width and the rotation speed. The simulated average heat transfer coefficients for all the models are in good agreement with the correlations from published literature. The Taylor-Couette vortical flow pattern is observed in the air-gap in our simulation results for the models with large air-gaps. The numerical results show that the presence of Taylor-Couette vortices in the air-gap enhance the heat transfer. The heat transfer coefficient increases with the increase in the rotation speed and decreases with the decrease in the air-gap width.