AI-driven pseudo-light source for achieving high coherence and low speckle noise simultaneously in dual-wavelength digital holographic microscopy

Abstract

Digital holography, a promising technology for optical imaging, is limited by the fundamental challenge of speckle noise when based on coherent lasers. These approaches often compromise either coherence, affecting surface depth measurement capabilities, or introduce excessive noise, degrading image clarity. To eliminate this trade-off, this study introduces a novel solution based on an AI-driven pseudo-light source that simultaneously achieves high coherence and low speckle noise in holographic imaging. Consisting of conditional generative adversarial networks, the AI model was trained on paired holograms from both highly coherent laser light and partially coherent quantum dot (QD)-based light sources to generate holograms that mimicked the low-noise characteristics of QD-based light while retaining the high coherence length of laser. The effectiveness of the pseudo-light source was validated through holographic observations on a reflective 8.0-µm-deep specimen. Compared to the laser, the AI-driven pseudo-light source achieved substantial improvement in interference pattern clarity and reduced speckle noise contrast from 0.602 to 0.0873. Moreover, the standard deviation of the surface depth distribution was notably reduced from 215.3 nm to 44.7 nm. Quantitative phase evaluations further confirmed the preservation of accurate phase information in the generated holograms, verifying the successful reconstruction of the three-dimensional specimen structure.