Abstract
ABSTRACTIn this study, corn stover lignin with different purities was used as filler in polylactic acid (PLA) matrix. It was found that the impurity metals present in unpurified lignin can significantly affect the performance of the composites in terms of their thermal stability, rheological behavior, mechanical properties, and hydrophobicity. Among the PLA composites, the ones fabricated with the lignin containing 4% of impurities overall had the best thermal stability and tensile strength. From melt rheology analysis, it was also found that the presence of the impurity metals decreases the complex viscosity of the composites. It is suggested that the impurity metals acted as catalysts to promote the interaction between lignin and PLA, resulting in an improved compatibility between PLA and the filler. In the present study, mechanical properties and hydrophobicity of the composites were further improved by acetylating the lignin with the optimum content of impurities. Tensile strength of the composite with the acetylated lignin was comparable to that of pure PLA, whereas the modulus increased to as high as 2.75 GPa. Overall, the study showed that unpurified lignin could be used as filler to achieve similar or better performance than the composites made with highly purified lignin fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47915.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
