Abstract
A diethanolamine stabilized precursor sol has been utilized for studying the effect of sol aging and annealing temperature on key properties of TiO2 films. X-ray diffraction investigations have shown increased crystallite size in the films as a function of both sol aging and the thermal treatment. Fourier transform infrared studies have elucidated that cleavage of the bond involving diethanolamine and the alkoxide in the films requires high temperature annealing treatment upon the use of aged sol for the deposition of the films. Multiple step chronoamperometry has shown the ion storage capacity of the films increases as a function of sol aging, with the highest extent of Li ion insertion being obtained for films produced from as-prepared and aged sols and subsequently annealed at, 300 and 350 °C, respectively. Films with excellent optical quality were obtained. Ellipsometry revealed that the refractive indices of the films vary from 1.67 to 2.02. The highest thickness obtained in these films was nearly 900 nm. The bandgaps of the films for both direct and indirect transitions decreased as a function of precursor sol’s aging. In addition, although the indirect bandgap values have shown a decrease with increasing annealing temperature, the direct bandgap values reveal a slight increase as a function of annealing temperature.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
