Abstract
This study aims to investigate quantitatively the direct correlation between the mechanical strength of powder agglomerates and their dispersion into aerosols by a dry powder inhaler. Agglomerates of mannitol as a model drug-only formulation were prepared by a rolling method followed by exposure to various relative humidity (RH: 55%, 82%, 86% and 90%). The agglomerate strength was obtained from the compression of single agglomerates at a selected speed rate using an Instron testing machine. The dispersion performance (FPF Loaded) was determined at flow rates of 60 and 100 l min −1 using an Aeroliser ® coupled to a multistage liquid impinger. Results showed an inverse linear relationship between the agglomerate strength and the dispersion performance. An increase in strength from 3 to 183 kPa resulted in a significant drop ( P<0.05) of 18% in the FPF Loaded. Agglomerates containing ‘solid bridges’ exhibited higher strength (three to eight times) and lower FPF (5–15%, corresponding to 86% and 90% RH) compared to those containing ‘liquid bridges’. These results have provided direct information on the agglomerate strength and its quantitative relationship with powder aerosol performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.