Abstract
Carbon fiber reinforced polyurethane (CFRPU) composites exhibit a high potential in infrastructure application due to their efficient manufacturing and excellent mechanical properties. In the present article, the resistance to seawater immersion of a thermosetting polyurethane (PU) and its pultruded CFRPU plates was investigated, which was compared to a commonly used epoxy resin as well as its pultruded plate. The ageing conditions were determined as immersion in artificial seawater for one year at 20 °C, 40 °C or 60 °C. The water absorption/desorption, glass transition temperature (Tg), fiber-matrix interfacial bond strength and the tensile properties were evaluated as a function of time. As indicated by the water uptake testing, the PU resin exhibits a relative high water uptake (∼2.65%), while the CFRPU plates show a much lower value (∼0.71%), illustrating the good seawater resistance of the PU resin and the CFRPU. The positive resistance results were further supported by the high retention of the fiber-matrix interfacial bond strength and glass transition temperature for the immersed samples. In addition, the seawater immersion brings in a very slight decrease in the tensile strength for the PU and CFRPU plates. In terms of the above tested performances, the PU and CFRPU are significantly superior to the epoxy and carbon fiber reinforced plates. This result is attributed to the PU-carbon fiber adhesion of high resistance to the seawater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.