Ageing effects and internal stresses in quenched unfilled and clay-filled high density polyethylene

Abstract

The stress relaxation and creep behaviour of high density polyethylene (HDPE), unfilled or filled with clay particles, were measured after different ageing times after quenching from 120 °C. The measurements were performed at room temperature in the uniaxial extension mode. Ageing time had a pronounced influence on the viscoelastic properties, e.g. the creep curves shifted to longer times with increasing ageing time. The internal stresses, as evaluated from stress relaxation data, were found to increase markedly when the ageing period was extended, and it was suggested that this behaviour may be associated with relaxation of thermal residual stresses. It was furthermore suggested that the change in residual stresses, in addition to the physical ageing process, could also affect the ageing behaviour of HDPE, i.e. the change in viscoelastic properties with ageing time. Clay addition changes the ageing behaviour of HDPE, which could be attributed to a change in the internal stress dependence of the ageing time and/or to a difference in the physical ageing process. The effects of a surface treatment on the ageing of HDPE-clay composites are also evaluated and discussed.