Ag mesh network framework based nano composite for transparent conductive functional electrodes for capacitive touch sensor and thin film heater

Abstract

We report on the development of a highly conductive, transparent and flexible Ag mesh-like network covered by an ITO/PEDOT:PSS nanocomposite for flexible conductive electronics. The electrode was deposited completely via solution-based deposition. A lower Rs value, from 7.21 Ω/□ to 5.05 Ω/□, was achieved by annealing the substrate via low-temperature plasma annealing. The low-temperature annealing was used to achieve crystallinity of the materials without deformation and degradation of PEDOT:PSS and the PET substrate. The low-cost deposition-based Ag NW-ITO/PEDOT:PSS electrode substantially decreased sheet resistance and provides the transmittance of 85.17%. The chemical stability and mechanical stability of the product were examined, and morphological studies were performed; in all of these, the substrate exhibited excellent behavior. Finally, a transparent flexible electrical heater and capacitive touch screen panel were fabricated using the Ag NW-ITO/PEDOT:PSS electrode to demonstrate the performance of the electrode and its potential applications.