Abstract
To eliminate NOx emission and slip ammonia from coal-fired plants, ZSM-5 zeolites were modified with copper and different amount of silver. According to the activity measurement results, Ag1.5-Cu/ZSM-5 zeolite could exhibit 100 % NH3 conversion efficiency at 350 ℃ and the N2 selectivity was more than 90 %. Meanwhile, when NO was introduced in the gas flow, the NO and NH3 conversion efficiency of Ag1.5-Cu/ZSM-5 reached 97 % and 100 % at 300 ℃. The catalyst also showed good tolerance to H2O and SO2. XRD, BET, SEM and TEM experiments confirmed that the addition of silver and copper oxides would not destroy the MFI skeleton structure orsignificantly destroy the microporous and mesoporous structure of the molecular sieve. Moreover, Ag-Cu/ZSM-5 catalyst exhibited stronger surface acidity and promoted the NH3 adsorption ability (NH3-TPD). In addition, there were more active oxygen on Ag-Cu/ZSM-5 catalyst resulting from the interaction between silver and copper oxides, which contributed to its better redox performance (XPS and H2-TPR).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.