Abstract
본 연구에서는 Ag-Cu합금 코팅에 의한 탄소나노튜브의 전계방출특성 변화를 연구하였다. 화학기상증착 방법을 사용하여 수직 성장시킨 탄소나노튜브에 직류 마그네트론 스퍼터를 이용하여 Ag-Cu합금을 증착하였고, 열처리 전 후의 탄소나노튜브의 표면형상 변화와 전계방출특성에 변화를 연구하였다. 연구결과 Ag-Cu합금 코팅으로 전계방출 문턱전압이 현저히 낮아졌으며 전류밀도는 <TEX>$6V/{\mu}m$</TEX>의 인가전압 하에서 약 5배 향상된 것을 확인하였다. 또한 Ag-Cu합금이 코팅된 탄소나노튜브는 산소가 많이 포함된 분위기에서도 안정적인 전계방출 특성을 보였으며, 이는 Ag-Cu합금 코팅이 분위기 진공에 상존하는 산소기체가 탄소나노튜브를 공격하는 것을 막아주는 역할을 하여 열악한 분위기에서도 전계방출이 안정적으로 발생하였기 때문인 것으로 생각된다. The field emission properties of CNT-emitters coated with Ag-Cu alloy have been investigated. The vertical aligned multi-walled CNTs were synthesized by dc-plasma enhanced chemical vapor deposition (dc-PECVD) and the Ag-Cu alloy was coated by using dc-magnetron sputter. The morphology of alloy-coated and un-coated CNT-emitters was observed by using SEM and their field emission properties were also measured. Annealing the AgCu-coated CNTs at temperature more than <TEX>${\sim}700^{\circ}C$</TEX>, the Ag-Cu alloy was diffused to and aggregated on the top of the CNT as a Q-tip. A significant progress on the field emission was not observed with coating Ag-Cu alloy on the CNTs, but a certain improvement in a resistance against oxygen gas was made confirmation. It seems to be due to inertness of Ag-Cu alloy on the CNTs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
