Aerosol Generation During Laryngology Procedures in the Operating Room.

Abstract

Severe acute respiratory syndrome coronavirus-2 spreads through respiratory fluids. We aim to quantify aerosolized particles during laryngology procedures to understand their potential for transmission of infectious aerosol-based diseases. Prospective quantification of aerosol generation. Airborne particles (0.3-25 μm in diameter) were measured during live-patient laryngology surgeries using an optical particle counter positioned 60 cm from the oral cavity to the surgeon's left. Measurements taken during the procedures were compared to baseline concentrations recorded immediately before each procedure. Procedures included direct laryngoscopy with general endotracheal anesthesia (GETA), direct laryngoscopy with jet ventilation, and carbon dioxide (CO2 ) laser use with or without jet ventilation, all utilizing intermittent suction. Greater than 99% of measured particles were 0.3 to 1.0 μm in diameter. Compared to baseline, direct laryngoscopy was associated with a significant 6.71% increase in cumulative particles, primarily 0.3 to 1.0 μm particles (P< .0001). 1.0 to 25 μm particles significantly decreased (P< .001). Jet ventilation was not associated with a significant change in cumulative particles; when analyzing differential particle sizes, only 10 to 25 μm particles exhibited a significant increase compared to baseline (+42.40%, P= .002). Significant increases in cumulative particles were recorded during CO2 laser use (+14.70%, P< .0001), specifically in 0.3 to 2.5 μm particles. Overall, there was no difference when comparing CO2 laser use during jet ventilation versus GETA. CO2 laser use during laryngology surgery is associated with significant increases in airborne particles. Although direct laryngoscopy with GETA is associated with slight increases in particles, jet ventilation overall does not increase particle aerosolization. 3 Laryngoscope, 131:2759-2765, 2021.