Aerodynamic optimization of the exhaust system of an aft-mounted boundary layer ingestion propulsor

Abstract

PurposeNovel aircraft propulsion configurations require a greater integration of the propulsive system with the airframe. As a consequence of the closer integration of the propulsive system, higher levels of flow distortion at the fan face are expected. This distortion will propagate through the fan and penalize the system performance. This will also modify the exhaust design requirements. This paper aims to propose a methodology for the aerodynamic optimization of the exhaust for novel embedded propulsive systems. To model the distortion transfer, a low order throughflow fan model is included.Design/methodology/approachAs the case study a 2D axisymmetric aft-mounted annular boundary layer ingestion (BLI) propulsor is used. An automated computational fluid dynamics approach is applied with a parametric definition of the design space. A throughflow body force model for the fan is implemented and validated for 2D axisymmetric and 3D flows. A multi-objective optimization based on evolutionary algorithms is used for the exhaust design.FindingsBy the application of the optimization methodology, a maximum benefit of approximately 0.32% of the total aircraft required thrust was observed by the application of compact exhaust designs. Furthermore, for the embedded system, it is observed that the design of the compact exhaust and the nacelle afterbody have a considerable impact on the aerodynamic performance.Originality/valueThis paper presents a novel approach for the exhaust design of embedded propulsive systems in novel aircraft configurations. To the best of the authors’ knowledge, this is the first detailed optimization of the exhaust system on an annular aft-mounted BLI propulsor.