Abstract
With the objective of exploring the aerodynamic mechanism of triggering and suppression of vortex-induced vibration (VIV) for a triple-box girder, wind tunnel tests involving both static and dynamic pressure measurements, as well as CFD simulation for flow visualization were carried out on a bare girder. Both vortex-induced vibrations and surface pressures were obtained from static and dynamic sectional model tests for three typical wind incidence angles, namely α = 0°, +3°, and −3°. Results indicated that vortices shed regularly from the downwind sides of both windward box and middle box, then impinged on the upwind sides of middle box and leeward box respectively, resulting in prominent fluctuating pressures here, which was likely to render the triple-box girder more susceptible to VIV. Specifically, fluctuating lift of middle box was the main trigger of VIV at wind incidence angle α = +3°, while that of leeward box was the main trigger at α = 0° and −3°. The regular vortex shedding and impinging process could be effectively suppressed by the grid plates over girder slots, which was favorable to VIV mitigation. When VIV occurred, self-excited force became the main component of the fluctuating force, and it could be the major driver of the large-amplitude oscillation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Wind Engineering and Industrial Aerodynamics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.