Aerodynamic entrainment threshold: effects of boundary layer flow conditions

Abstract

ABSTRACTExperimental data are presented demonstrating the influence of boundary layer flow conditions on aerodynamic entrainment of grains in the absence of intersaltation collisions. New methods are proposed for (1) the unambiguous determination of aerodynamic threshold for any grain population and (2) approximation of the probability density function (PDF) distributions of threshold shear velocity for aerodynamic entrainment.In wind tunnel experiments, the orderly spatial development of flow conditions within a developing boundary layer over the roughened surface of a flat plate constrains the aerodynamic threshold condition in terms of both mean and fluctuating values. Initial grain dislodgements and subsequent erosion from narrow strips of loose, finely fractionated ballotini were recorded photographically as wind speed was increased. Boundary layer parameters, including average threshold shear velocity (U*t), were calculated using the momentum integral method.Direct observations show that sporadic oscillation of grains preceded dislodgement. At slightly higher velocities most grains rolled over their neighbours before entering saltation. Initial entrainment in spatially semi‐organized flurries of 50 or more grains was followed by quiescent periods at airflow velocities close to threshold. These observations provide strong circumstantial evidence linking both the nature and spatial pattern of initial grain motions to sweep events during the fluid bursting process.For each grain fraction, values of U*t were found to span an unexpectedly wide range and to decrease downwind from the leading edge of the plate as turbulence intensity increased. A probabilistic entrainment model is applied to the aerodynamic threshold condition so as to incorporate the effects of changing turbulent flow regimes over the plate. Analysis of strip erosion curves gives both an objective definition of the threshold condition and usable approximations of the PDF for U*t required by the model and for future stochastic treatment of the threshold condition.