Aerodynamic Analysis of a Supersonic Transport Aircraft at Low and High Speed Flow Conditions

Abstract

The recent improvement of technology readiness level in aeronautics and the renewed demand for faster transportation are driving the rebirth of supersonic flight for commercial aviation. However, the design of a future supersonic aircraft is still very challenging due to the complexity of several problems, such as static stability performance during the acceleration phase from subsonic speeds to supersonic speeds. Additionally, the interest of scientific community in open source numerical platform as a valid tool for a reliable and affordable aerodynamic design is considerably growing. In this framework, the present work addresses the aerodynamic performance of a Concorde-like aeroshape developed within the preliminary design of a high-speed civil transportation aircraft. Several flight conditions, ranging from subsonic to supersonic speeds, were investigated in detail by using Computational Fluid Dynamics. The aerodynamic force and moment coefficients are computed with fully three-dimensional and steady state Reynolds Average Navier-Stokes simulations, carried out in turbulent flow conditions. The effect of the Mach number variation on the shift of the aircraft aerodynamic center is detailed, by focusing on the aircraft pitching static stability. Flowfield numerical simulations are performed with both commercial (Ansys-Fluent) tool and open-source (SU2) code, which is also used extensively in multidisciplinary design procedures, for further comparisons. Particular attention is focused on the shift of the aeroshape aerodynamic center to verify that the provided wing design allows the aircraft static margin to be within 5% of the reference length, both at low-speed and high-speed flight conditions. The computed positions of the aerodynamic center are in agreement with the aeroshape surface pressure distributions and confirmed the literature results available for the Concorde aircraft. Therefore, in the view of future simulation campaigns for supersonic transportation aircraft, the present work aims to bridge the gap between previous aerodynamic design experiences, for instance matured on Concorde, and those carried out with modern CFD tools on full-scale aircraft, and on time-scales compatible with conceptual design practice. Finally, as the difference between the computed aerodynamic coefficients reflected mainly on drag computation performed with SU2, a special focus on numerical diffusion effect of the solver is also given and compared with a commercial certified CFD tool. This adds a unique further contribution to the SU2 community for aeronautics application.