Aerobic granular sludge development using diatomite for low-strength wastewater treatment

Abstract

This paper presents an assessment of the start-up performance of aerobic granular sludge (AGS) for the treatment of low-strength (chemical oxygen demand, COD < 200mg/L) domestic wastewater by the application of a diatomite carrier. The feasibility was evaluated in terms of the start-up period and stability of the aerobic granules as well as COD and phosphate removal efficiencies. A single pilot-scale sequencing batch reactor (SBR) was used and operated separately for the control granulation and granulation with diatomite. Complete granulation (granulation rate ≥ 90%) was achieved within 20days for the case of diatomite with an average influent COD concentration of 184mg/L. In comparison, control granulation required 85days to accomplish the same feat with a higher average influent COD concentration (253mg/L). The presence of diatomite solidifies the core of the granules and enhances physical stability. AGS with diatomite recorded the strength and sludge volume index of 18 IC and 53mL/g suspended solids (SS) which is superior to control AGS without diatomite (19.3 IC, 81mL/g SS). Quick start-up and achievement of stable granules lead to an efficient COD (89%) and phosphate removal (74%) in 50days of bioreactor operation. Interestingly, this study revealed that diatomite has some special mechanism in enhancing the removal of both COD and phosphate. Also, diatomite has a significant influence on microbial diversity. The result of this research implies that the advanced development of granular sludge by using diatomite can provide promising low-strength wastewater treatment.