Abstract
Headcuts are points of accelerated channel erosion that frequently have ecological consequences. A particularly large and dynamic headcut in southwest Wyoming has affected natural and anthropogenic resources for decades. To better understand and address this issue, we undertook a review of the headcut's upstream retreat, followed by photogrammetric monitoring of the present condition for erosion monitoring. Aerial photography shows the Bitter Creek headcut retreated > 200m upstream in 68years (1948-2016) at ~ 1.4myear-1. Following installation of a concrete slab structure inthe mid-1970s, headcut retreat slowed to ~ 0.5myear-1. Channel sinuosity downstream of the headcut is greater than upstream, which we attribute to the presence of the headcut, given that there are no major changes in valley geometry, geology, or soils through this reach. Both aerial and terrestrial-based image platforms were used to collect stereo imagery and create 3D photogrammetric models of the headcut in 2016. From these two models, we measured soil loss downstream of the headcut at ~ 126m3m-1 valley length. Since 1954, soil loss within the channel has been ~ 98m3year-1 or ~871tha-1year-1since then. Models created from aerial- and terrestrial-based images differed in volumetric estimates by 2%, indicating that either method could be used for this type of monitoring. The ground-based imagery model showed more detail, especially on vertical and overhanging surfaces, while the aerial imagery model produced a more realistic orthomosaic and efficiently covered a larger area. Ground-based image acquisition took longer and was more costly per unit area, but is an efficient method for small project areas, or areas where aerial imagery cannot be safely or practically acquired. Historical imagery and photogrammetric modeling proved very useful in elucidating stream dynamics associated with this large, dynamic headcut.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.