Abstract
The work presented in this paper concerns the application of a two-stage aerobic activated sludge process for treatment of effluents from paper mills in Denmark. The paper describes both pilot-scale test results and fullscale experience with the process. The treatment process is characterised by a bigh-load first stage (2-4 kg COD/kg MLSSxd) followed by a low-load second stage to secure full nitrification and denitrification of remaining nitrogen compounds. The results of continuous pilot-scale tests show that it is possible to obtain a reduction of more than 85% of the incoming COD,01 and a 99% reduction of the incoming BOD5, resulting in an effluent quality of 230 mg CODsol/l and less than 10 mg BOD5/l. As indicated, practically all the biodegradable organic substances are removed by the process. The remaining fraction of soluble organics measured as COD is considered to be non-biodegradable by conventional biological treatment systems. The results produced in the pilot-scale tests are confirmed by the effluent qualities obtained in a full-scale treatment plant at another paper mill, involving an identical process concept. During the pilot-scale tests, special attention bas been paid to the removal of organic compounds, organic nitrogen as well as nutrients and nitrification. In addition, the sludge characteristics and the oxygen requirements have been considered.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
