Abstract
The applicability of microsieve technology together with coagulation and flocculation for advanced phosphorus removal was investigated. A pilot unit including a microsieve with 10 μm mesh size was operated continuously with secondary effluent from Ruhleben wastewater treatment plant in Berlin. By applying a pretreatment of 0.07-0.09 mmol/L (as metal) coagulant and 1.5-2 mg/L cationic polymer, total phosphorus values below 80 μg/L were achieved. Coagulation with polyaluminum chloride (PACl) produced a better effluent quality compared to FeCl3, as less suspended solids and less residual coagulant were found in the microsieve effluent. In addition, the transmittance of UV radiation through the water was improved by using PACl. The produced amount of backwash water was always below 3% (on average 1.6%). Under optimized mixing conditions, polymer doses of 0.6 mg/L were possible without losses in water quality and filtration performance. Microsieving with chemical pretreatment is a viable option for high quality effluent polishing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
