Advanced NiMoO4/g-C3N4 Z-scheme heterojunction photocatalyst for efficient conversion of CO2 to valuable products

Abstract

Abstract Herein, g-C3N4 and NiMoO4, which are moderate energy band gap semiconductors, have been effectively hybridized to create Z scheme heterojunction for successful visible-light photocatalytic converting CO2 into valuable products including CH4, CO, O2 and HCOOH. Ni(NO3)2·6H2O and (NH4)6Mo7O24·4H2O were used as precursors to synthesize NiMoO4 photocatalyst, which was continuously mixed with melamine before calcinating at 520 °C for 6 h to get NiMoO4/g-C3N4 Z scheme heterojunction. We explored that NiMoO4 intimately contacted with g-C3N4. These band positions of the NiMoO4 were also perfectly matched with those of the g-C3N4. Therefore, these photo-induced e− on conduction band of the NiMoO4 could easily travel to h+ on valence band of the g-C3N4 (recombination); thereby, minimize h+ and e− recombination in each material. Therefore, the NiMoO4/g-C3N4 direct Z-scheme heterojunctions could produce significant available h+ on the valence band of the NiMoO4 and e− on the conduction band of the g-C3N4. These e−/h+ have suitable redox potential to effectively convert CO2. Finally, the optimized g-C3N4 mole ratio for maximum enhancing photocatalytic efficiency of the NiMoO4/g-C3N4 heterojunction was 60%. When the g-C3N4 content increased to 70%, the excess g-C3N4 amount would entirely cover NiMoO4 surface leaded to form dense and closed shell. The formed closed shell decreased contact between NiMoO4 and CO2 as well as the interface charge transfer, which reduced the e− and h+ separation and transfer leading to decrease in photocatalytic conversion efficiency.