Advanced frequency control schemes and technical analysis for large-scale PEM and Alkaline electrolyzer plants in renewable-based power systems

Abstract

Integrating electrolyzers into power systems can significantly contribute to sustainable energy via the generation of green hydrogen while also enhancing frequency stability through effective regulation of the electrolyzers’ operating power. This study gives a comprehensive analysis of large-scale electrolyzer plants when providing frequency support to power systems. First, the authors present a model predictive control (MPC)-based secondary frequency controller, combined with a droop controller as the primary frequency controller and a virtual inertia controller. Additionally, the study introduces a universal system frequency response (U-SFR) modeling approach that enables high accuracy, low computation burden, and reduced initial parameters as a testbed. Finally, an in-depth analysis is conducted, focusing on different technical aspects of large-scale electrolyzer plants when providing frequency support services. Case studies integrating PEM and Alkaline electrolyzers into the modified IEEE 39-bus system with over 50% wind power penetration are conducted. It is found that the proposed U-SFR model achieves high accuracy with lower computational time compared to detailed physical models. Additionally, model predictive controllers improve frequency quality more effectively than PID and PID-FLC methods. PEM electrolyzers are found to be more efficient in providing grid frequency support than alkaline electrolyzers due to their technical characteristics. Finally, smaller hydrogen tanks may frequently breach storage constraints, negatively impacting the system’s frequency response capability.